In this, I will introduce how to install Red Hat 7.3
Prepare:
a. Configuration Server:
+ CPU : Intel PII 400 or higher
+ RAM : 128MB or higher
+ HDD : 10GB or higher
+ NIC card : 100 Mbps
+ External Modem
+ …….
b. Swicth have speed 100 Mbps.
c. Cable and other necessary equipment.
d. The client have configuration.
+ CPU từ 486 trở lên
+ RAM : 64 MB
+ HDD : 4.3GB hoặc cao hơn.
+ NIC card : 100 Mbps.
+ ……….
The first, install and boot from CDROM. In the disk Red Hat 7.3 on the 1st, at th prompt "boot", input Enter. Once in the inside, skip to step check CDROM, the next screen will appear as follows:
Default is English language --> Click Next.
Please choose hardware appropriately and click Next. Then you will see appear dialog box follows:
Click Next to continue.
Please Select the type you want to you. In here you will select " Custom System" to add some necessary package. Click NEXT.
The next dialog box will appear. In here, you have 2 select.
- Select 1st: the operating system will remove all DATA on your PC and automatically select the partition to install.
- Select 2nd : You will select partition to install and setup with how much disk space.
You have map:
Ex: You will creat partitions follows:
/boot 5 MB
<Swap> 512 MB
/ 256 MB
/usr 512 MB
/home 5700 MB
/var 256 MB
/tmp 329 MB
Note: Boot is where the entire image of the kernel. Partition Swap will be the workplace of Linux virtual memory. Partition Swap will have twice the capacity of the existing RAM size. Partition Home will be where storage capacity of each User. Meaning that each user will have a capacity of 100 MB. Partition Home will numerical user x 100.
When you will have interface as bellow:
Your server will have partitions as bellow:
+ /Boot: 100MB
+ Swap: RAM x 2
+ /Home: Depending on the number of users
+ / Var: 3 GB
+ / Opt: 512 MB
+ /: Use the entire remaining capacity.
In addition, You may also be some other partition depending on the package will use them as a place to store like (Ex: /cache, /chroot, ...)
After creating the partition, the next screen will be:
The operating system will mark the partition to format, click NEXT.
Click NEXT and the operating system will use the default boot MILO Linux software.
After that, you will define the parameters of the network as shown above. Click NEXT.
This is the option for you to specify the language that the system provides. Click NEXT.
In here, you wil define the security mode for the system follow the option is "No Firewall" and in this function, you can change easily when in the interface of Linux. Click NEXT.
Select the time zone where the installation area. Click NEXT.
In here, you will define the root user password (Administrator), and creating some other account. Click NEXT.
Finally a place specified security mode encryption using MD5 and shadow passwords, default is "Default". Click NEXT.
Depending on the purpose of use that you will install the necessary package. Click NEXT and the operating system will start the installation.
After installation is complete, the operating system will notify you reboot and the installation process is complete.
Không có nhận xét nào:
Đăng nhận xét